5/19/2014

BSTFLEX Colored Fiberglass Exhaust Wrap pictures

BSTFLEX Colored Fiberglass Exhaust Wrap pictures




























1000°F  520°C Continuous Exposure Higher Intermittent
Fiberglass Header Wrap     

Fiberglass Header Wrap Heat, Flame & Fire Resistant and Thermal Insulating - Premium Grade Color Coded
Fiberglass Header Wrap is heat, flame and fire resistant.  Fiberglass (fibreglass or glass-fibre) woven tapes are fabricated from high quality type E fiberglass that will not burn and will withstand continuous exposure to temperatures of 1000°F  520°C.
Fiberglass Header Wrap can be used to easily identify wiring, cables, hoses or pipes such as supply or return lines.
Available colors are Gray, Red, Blue, White, Black, Nature, Yellow, and so on in 1 and 2 widths.  If additional colors are required, use of a plain fiberglass tape results in White being available.  By using the automotive header wrap tape, Black would also be available.
This material resists most acids and alkalis and is unaffected by most bleaches and solvents.  It is flexible and conformable.  
Benefits of our High-Temperature Fiberglass Heat Protection Products
Fiberglass offers excellent heat resistance, retaining more than half of its room temperature tensile strength at 675°F  357°C, and more than 25% at 875°F  468°C.  It begins to soften at 1500°F  815°C and melts near 2050°F  1121°C. Non-combustible and excellent thermal conductivity to dissipate hot spots; high resistance to chemicals and unaffected by UV light.
Customers size and color is available.
Always wear safety glasses, dust mask, gloves and long sleeves are recommended when handling this product
Proudly Made By BST Thermal Protection Products Co.,Ltd

32 oz Flame Protective Fire Blanket


32 oz Flame Protective Fire Blanket

Heat, flame and weld spatter protection, designed to exceed industrial standards where resistance to moisture, sunlight, corona and hydraulic oils is needed.

Flame Protective Fire Blanket
A midweight (32oz/yd2; 1085g/m2) high temperature resistant fabric, constructed from a glass fiber base fabric, impregnated both sides with a specially compounded silicone rubber coating designed to shed heavy weld spatter and resist heat and occasional flame.

Impervious to contaminants
32 oz Flame Protective Fire Blanket is completely impervious to water, moisture, hydraulic oils. It is used primarily for fabrication of premium grade valve insulation covers, hanging flame-protection blankets in outdoor and offshore use, and protective molten splash applications.

Stock and custom colours and sizes
Available in iron oxide red. Other colours available by special order. Flame Protective Fire Blanket 32 oz is sold in 60″ and 36″ widths (1525 mm and 915 mm) x 150 ft (45 m) rolls. It can also be supplied in cut lengths, custom shapes, or as custom fabricated curtains with grommets.

Aerospace AS1072 Grade Fire Sleeve











Aerospace AS1072 Grade Fire Sleeve
500°F/260°C Continuous Exposure: Higher Intermittent


Aerospace AS1072 Grade Fire Sleeve was specially developed to meet the fire resistance requirements of FAATSO - C53a OR TSO - C75.
Aerospace AS1072 Grade Fire Sleeve can withstand repeated exposures to molten steel, molten aluminum and molten glass up to 3000°F (1650°C).

Sheds splash immediately
Aerospace AS1072 Grade Fire Sleeve withstands repeated exposures to molten steel, molten aluminum and molten glass up to 3000°F (1650°C). The heavy coating of our proprietary iron oxide red silicone rubber compound sheds molten metal splash immediately, so very little heat transfer occurs.

Withstands intense radiant heat and flame
Aerospace AS1072 Grade Fire Sleeve will withstand continuous exposure to 500° F (260°C); up to 2000°F (1090°C) for 15-20 minutes; and up to 3000°F (1650°C) for 15-30 seconds. When exposed to flame, the silicone rubber transforms into a crust, creating a protective SiO2 refractory layer.

Aerospace AS1072 Grade Fire Sleeve is constructed from high bulk glass fiber braided sleeve. Excellent modulus of elasticity makes it an excellent choice for bundling hoses, tubes and cables in a variety of hostile environments.

Protect your personnel and cut your energy loss
Aerospace AS1072 Grade Fire Sleeve is insulation properties provide personnel with effective protection against burns from hot hoses and flexible steam lines, while reducing heat energy losses.

Always wear safety glasses, dust mask, gloves and long sleeves are recommended when handling this product 

Proudly Made By BST Thermal Protection Products Co.,Ltd
 
Inside diameter - mmInside diameter tolerance - mmThickness and tolerance - mm
4-10  ± 0.33.0 ± 0.2
12-18± 0.43.5 ± 0.3
20-32± 0.84.0 ± 0.4
35-55± 1.0 4.3 ± 0.5
60-100± 1.04.5 ± 0.5
105-150± 1.05.5 ± 0.5
 
Aerospace AS1072 Grade Fire Sleeve - Quick Facts
Custom colours available by special order.
Continuous operating temp:
500°F (260°C)
Max short term exposure:
3000°F (1650°C)
Molten splash resistance:
Outstanding
Flame resistance:
Very good
Abrasion resistance:
Very good
Flexibility:
Outstanding
Water and oil resistance:
Outstanding