8/31/2014

17 OZ Silicone Coated Fiberglass Cloth


17 OZ Silicone Coated Fiberglass Cloth
17 OZ Silicone Coated Fiberglass Cloth 17 oz/yd2, 578 g/m2, high temperature resistant fabric, designed to shed weld spatter and resist high heat and occasional flame.
Normally available in iron oxide red, or silver. Other colours available by special order.
17 OZ Silicone Coated Fiberglass Cloth nomal size is in rolls 60″ (1525 mm) wide by 150′ (45 m) long. It can also be supplied in cut lengths, custom shapes, or as fabricated curtains with grommets.
17 OZ Silicone Coated Fiberglass Cloth is a fibreglass base fabric which has been coated or impregnated with our specially formulated silicone rubber compound. It provides greater abrasion puncture and tear resistance to our base fibreglass cloth. It provides great life, water and oil resistance.
Typical Applications:
Welding blanket and curtains
Expansion joints
High temperature insulation
Heat shield and containment
Removable insulation cover
Fire blankets

Visit us for more products,
www.bstbraidedsleeve.com
www.firesleevetec.com

8/29/2014

Expandable Acrylic Saturated Fiberglass Sleeve


Expandable Acrylic Saturated Fiberglass Sleeve
Expandable Acrylic Saturated Fiberglass Sleeve
Constructed from smooth glass fiber yarn, braided at high yield angles to allow for approx: 25% expansion and contraction. 

Heavy wall braided glass fiber sleeve
Expandable Acrylic Saturated Fiberglass Sleeve is an expandable braided glass fiber sleeve capable of operating at a continuous temperature of 1000°F (538°C).

Designed to expand and contract by approximately 25% of its nominal size, the smooth glass fiber yarn is heat cleaned and coated with an acrylic saturant to eliminate loose fibers, enhance handling characteristics, and improve abrasion resistance. The acrylic saturant begins to decompose around 400°F (204°C), but with no effect on the thermal performance of the sleeve.

Color: Natural tan color is standard.

Expandability creates custom size range
Due to its wide range of expansion and contraction, Expandable Acrylic Saturated Fiberglass Sleeve is available in just four nominal sizes that cover a complete range of diameters from 3/8″ (10 mm) up to 3-1/2″ (89 mm).

Expandable Acrylic Saturated Fiberglass Sleeve quick facts
Continuous operating temp:
1000°F (538°C)
Max short term exposure:
1300°F (705°C)
Flame resistance:
Very good
Abrasion resistance:
Very good
Flexibility:
Very good

8/27/2014

Silicone Treated Fire Sleeve


Silicone Treated Fire Sleeve
Silicone Treated Fire Sleeve is made of braided fiberglass with a special impregnated coating. This heat protection mesh is harmless and fully meets the requirements of health and safety regulations. The special coating is self-extinguishing and does not contain halogenated flameproof substances.
The coatings are resistant to oil and solvents. They have top mechanical resistance as well as good wear resistance.
Same features as other fire sleeve.

8/25/2014

Heat resistant sleeving sizes


Ningguo BST Thermal Products Co.,Ltd makes different kinds of heat resistant sleeving.

Silicone coated fiberglass braided heat resistant sleeving size we provide from inside diameter 4mm to 127mm, customs size is available is order is large.

Heat resistant sleeving protects continuously to 260°C/500°F and will withstand a molten splash at 1200°C/2200°F. Made of braided fiberglass yarns in a flexible substrate,it is then coated with a high grade silicone rubber.






8/24/2014

T3 T4 T6 T25 Titanium Turbo Blanket

T3 T4 T6 T25 Titanium Turbo Blanket












With an outer layer made from actual pulverized volcanic lava rock (continuous-filament basalt) formed into fabric and woven into a tight mesh weave, these turbo blankets are internally insulated with high temperature calcium magnesium silicate wool, overlaid with a high temperature silica fabric for increased durability and for improved thermal resistance. We also provide LAVA fiber fabric inside, too. The Lava Turbo Blankets are designed to withstand the harshest of conditions.
T3 T4 T6 T25 Titanium Turbo Blanket Heat Tolerance:Interior Surface:
Max Temperature Rating: 2300 Deg F/ 1260 Deg C
Continuous Use Limit: 1832 Deg F/ 1000 Deg CExterior Surface:
Direct Contact Limit: 1800 Deg F/ 982 Deg C
Radiant Heat Limit: 2500 Deg F/ 1371 Deg C
Fits T3 flange turbocharger housings.

8/22/2014

Fire Sleeve with Velcro


Fire Sleeve with Velcro
Fire Sleeve with Velcro
Fire Sleeve with Velcro
Fire Sleeve with Velcro
Fire sleeve with Velcro Hook Loop Closure is designed to protect hoses,wires and cables from the hazards of high heat and occasional flame. Using high temperature thread, a flame retardant hook-and-loop velcro closure system is sewn internally. Install without disconnecting hoses or cables.
 
Fire sleeve with Velcro Hook Loop Closure protects continuously to 260°C/500°F and will withstand a molten splash at 1200°C/2200°F. Made of knitted fiberglass yarns in a flexible substrate,it is then coated with a high grade silicone rubber.

Economic Fire Sleeve


Economic Fire Sleeve
500°F/260°C Continuous Exposure: Higher Intermittent

Economic Fire Sleeve can withstand repeated exposures to molten steel, molten aluminum and molten glass up to 3000°F (1650°C). The thick is thinner than industry fire sleeve.

Sheds splash immediately
Economic Grade Fire Sleeve withstands repeated exposures to molten steel, molten aluminum and molten glass up to 3000°F (1650°C). The heavy coating of our proprietary iron oxide red silicone rubber compound sheds molten metal splash immediately, so very little heat transfer occurs.

Withstands intense radiant heat and flame
Economic Grade Fire Sleeve will withstand continuous exposure to 500° F (260°C); up to 2000°F (1090°C) for 15-20 minutes; and up to 3000°F (1650°C) for 15-30 seconds. When exposed to flame, the silicone rubber transforms into a crust, creating a protective SiO2 refractory layer.

Economic Grade Fire Sleeve is constructed from high bulk glass fiber braided sleeve. Excellent modulus of elasticity makes it an excellent choice for bundling hoses, tubes and cables in a variety of hostile environments.

Protect your personnel and cut your energy loss
Economic Grade Fire Sleeve is insulation properties provide personnel with effective protection against burns from hot hoses and flexible steam lines, while reducing heat energy losses.

Always wear safety glasses, dust mask, gloves and long sleeves are recommended when handling this product 
Proudly Made By BST Thermal Protection Products Co.,Ltd







8/15/2014

What is the fire sleeve


Fire sleeve is a common term for a Silicone coated fiberglass sleeve, generally used in industrial or aerospace applications.
Fiberglass acts as an insulator or barrier for constant temperatures up to 540ºC. Silicone is generally able to withstand temperatures up to about 260C degrees continuous. Silicone, however, has the added benefit of being able to withstand and repel much higher temperatures for short durations, including liquid molten metals.
Fire sleeve is used as a protective sleeve on industrial hoses, hydraulic hoses, cables, wires, etc.
Fire sleeve generally refers to two variations: An aerospace version is made with a braided fiberglass substrate and is commonly used in the aerospace industry. Its construction enables qualified hose assemblies to meet the SAE standards which have been established relative to the protection which this product provides.
An industrial version, constructed of a knitted fiberglass substrate is also available. Because it is less expensive it is more commonly used in hot industrial applications where this type of protection is needed. The industrial version will not meet the SAE standards.
Fiberglass sleeve—without the Silicone rubber coating—has a higher continuous temperature rating, up to 1000ºF or 540ºC and is available as a knitted or braided sleeve for protection of hoses and cables where molten splash protection or weld splatter protection is not required.
Fire sleeve is used for industry, aerospace, automotive, mining.