Fire Sleeve with Velcro

Fire Sleeve with Velcro

Fire sleeve with Velcro Hook Loop Closure is designed to protect hoses,wires and cables from the hazards of high heat and occasional flame. Using high temperature thread, a flame retardant hook-and-loop velcro closure system is sewn internally. Install without disconnecting hoses or cables.
 
Fire sleeve with Velcro Hook Loop Closure protects continuously to 260°C/500°F and will withstand a molten splash at 1200°C/2200°F. Made of knitted fiberglass yarns in a flexible substrate,it is then coated with a high grade silicone rubber.

Economic Fire Sleeve

500°F/260°C Continuous Exposure: Higher Intermittent

Economic Fire Sleeve

Economic Fire Sleeve can withstand repeated exposures to molten steel, molten aluminum and molten glass up to 3000°F (1650°C). The thick is thinner than industry fire sleeve.

Sheds splash immediately

Economic Grade Fire Sleeve withstands repeated exposures to molten steel, molten aluminum and molten glass up to 3000°F (1650°C). The heavy coating of our proprietary iron oxide red silicone rubber compound sheds molten metal splash immediately, so very little heat transfer occurs.

Withstands intense radiant heat and flame

Economic Grade Fire Sleeve will withstand continuous exposure to 500° F (260°C); up to 2000°F (1090°C) for 15-20 minutes; and up to 3000°F (1650°C) for 15-30 seconds. When exposed to flame, the silicone rubber transforms into a crust, creating a protective SiO2 refractory layer.

Economic Grade Fire Sleeve is constructed from high bulk glass fiber braided sleeve. Excellent modulus of elasticity makes it an excellent choice for bundling hoses, tubes and cables in a variety of hostile environments.

Protect your personnel and cut your energy loss

Economic Grade Fire Sleeve is insulation properties provide personnel with effective protection against burns from hot hoses and flexible steam lines, while reducing heat energy losses.

Always wear safety glasses, dust mask, gloves and long sleeves are recommended when handling this product 

Proudly Made By BST Thermal Protection Products Co.,Ltd

What is the fire sleeve

Fire sleeve is a common term for a Silicone coated fiberglass sleeve, generally used in industrial or aerospace applications.

Fiberglass acts as an insulator or barrier for constant temperatures up to 540ºC. Silicone is generally able to withstand temperatures up to about 260C degrees continuous. Silicone, however, has the added benefit of being able to withstand and repel much higher temperatures for short durations, including liquid molten metals.

Fire sleeve is used as a protective sleeve on industrial hoses, hydraulic hoses, cables, wires, etc.

Fire sleeve generally refers to two variations: An aerospace version is made with a braided fiberglass substrate and is commonly used in the aerospace industry. Its construction enables qualified hose assemblies to meet the SAE standards which have been established relative to the protection which this product provides.

An industrial version, constructed of a knitted fiberglass substrate is also available. Because it is less expensive it is more commonly used in hot industrial applications where this type of protection is needed. The industrial version will not meet the SAE standards.

Fiberglass sleeve—without the Silicone rubber coating—has a higher continuous temperature rating, up to 1000ºF or 540ºC and is available as a knitted or braided sleeve for protection of hoses and cables where molten splash protection or weld splatter protection is not required.

Fire sleeve is used for industry, aerospace, automotive, mining.