500°F / 260°C Continuous Exposure: Higher Intermittent
Aluminum Coated Kevlar Heat Reflective Sleeve
Performance lab tested at 3000°F (1650°C) for 1 minute, BST Better Than Pyreflect Firesleeve Heat Reflective Sleeve reflects at least 90% of radiant heat energy.
Cable and hose protection in extreme heat
An ideal choice for operations where occasional radiant infrared flow must be blocked or stopped. The mirror like surface of Aluminum Coated Kevlar Heat Reflective Sleeve reflects heat away, instead of absorbing heat and dissipating it through the fabric.
An ideal choice for operations where occasional radiant infrared flow must be blocked or stopped. The mirror like surface of Aluminum Coated Kevlar Heat Reflective Sleeve reflects heat away, instead of absorbing heat and dissipating it through the fabric.
Aluminum Coated Kevlar Heat Reflective Sleeve is fabricated from heat reflective fire blanket. BAluminum Coated Kevlar Heat Reflective Sleeve has two layers of aluminum coating and a protective film, all laminated to a specially designed heavy grade aramid fiber cloth by means of a heat stable adhesive. The aluminum layers will not delaminate from the cloth, even under the most extreme heat conditions.
Available double stitched or with velcro closure
The Aluminum Coated Kevlar Heat Reflective Sleeve is constructed by slitting the blanket to the appropriate width and double stitching the edge with high temperature glass fiber thread. It can also be supplied with the velcro option of a high temperature hook and loop closure system sewn inside the sleeve to allow installation without disconnecting hoses or cables. Aluminum Coated Kevlar Heat Reflective Sleeve has an extremely durable construction, and can meet the most demanding abrasion and tensile strength requirements.
The Aluminum Coated Kevlar Heat Reflective Sleeve is constructed by slitting the blanket to the appropriate width and double stitching the edge with high temperature glass fiber thread. It can also be supplied with the velcro option of a high temperature hook and loop closure system sewn inside the sleeve to allow installation without disconnecting hoses or cables. Aluminum Coated Kevlar Heat Reflective Sleeve has an extremely durable construction, and can meet the most demanding abrasion and tensile strength requirements.
Always wear safety glasses, dust mask, gloves and long sleeves are recommended when handling this product
Proudly Made By BST Thermal Protection Products Co.,Ltd
| Aluminum Coated Kevlar Heat Reflective Sleeve- Quick Facts | |
| Full Diameter range up to 12" (305mm) | |
| Continuous operating temp | 650°F (343°C) |
| MAX SHORT TERM EXPOSURE | 1000°F (538°C) |
| MOLTEN SPLASH RESISTANCE | Outstanding |
| Flame resistance | Good |
| Abrasion resistance | Outstanding |
| Durability | Outstanding |
| Flexibility | Outstanding |
| Water and oil resistance | Outstanding |
No comments:
Post a Comment