BSTFLEX Glass fiber fire sleeve application

STEEL WORK / METAL SMELTING

Glass fiber fire sleeve with heavy silicone coatings have proved to be ideal for protecting cables and components from molten metal splash in the metal smelting industry. Fire sleeves are often used on induction melting furnace coils and hoses. 

 

AEROSPACE

Aerospace grade fire sleeves are available. These are resistant to hydraulic fluids, lubricating oils and fuels. The Aerospace grade fire sleeves version allows qualified hose assemblies to meet AS1055D testing under stated flow and pressure conditions.

 

OIL RIGS

Glass fiber fire sleeve have been used to protect hoses and cables from harsh environments and to provide protection to personnel where hot hoses or components present a danger. 

 

AUTOMOTIVE & MOTORCYCLE

Glass fiber fire sleeve and tapes have been adopted by performance car enthusiasts. The high temperature sleeves give protection to sensitive components allowing bundling of wires, hoses and cables 

 

TRUCK AND BUS EXHAUSTS

Knitted fire sleeve produced from Basalt which are capable of withstanding and operating at 750 Degrees Celcius are being used to keep exhaust gases hot before they enter the catalytic converters on certain truck and bus designs. 

 

INDUSTRY

In all industrial areas where sparks might fly and there is a need to protect sensitive electrical components, Glass fiber fire sleeve can be the solution. 

 

HOSE PROTECTION

Glass fiber fire sleeve provide additional flexible insulation to control heat loss on hot hoses, and to provide protection to personnel that may come into contact with such hoses. 

 

GENERATOR EXHAUSTS

Glass fiber fire sleeve are often used on the exhausts of generators to aid noise reduction and to provide protection for personnel working near the hot pipes.

 

CABLE & WIRING SYSTEMS

Glass fiber fire sleeve will give additional protection to cables and wires which pass close to any heat source. Typical examples would be in boilers, ovens and furnaces.

 

SPECIAL APPLICATIONS

Glass fiber fire sleeve are used in special applications - including additional insulation on fire fighting breathing apparatus hoses. The Fire Sleeve protects the hose from falling hot debris which could potentially damage the apparatus in service. 

Vermiculite Coated Ceramic Fiber Fabric

Vermiculite Coated Ceramic Fiber Fabric is a woven fabric made of our high quality ceramic fiber yarns and then coated with vermiculite. It can be used for high temperature applications up to 1000° C. The cloth is reinforced with fiberglass filament. It contains a certain amount of binder material which is normally burned at lower temperature and does not affect the insulation property. Vermiculite coating enhances the fabrics unmatched abrasion resistance and tensile strength. it also provide a dust suppression coating which allows for a safer work environment.

 

Vermiculite Coated Ceramic Fiber Fabric Application:

It can used as expansion joints, safety blankets, curtains, welding blankets, protective and insulating covers, shields, 

gaskets, cable or pipe wrapping, etc. It has been widely used in welding, foundry works, aluminum and steel mills, 

boiler insulation and seal, shipyards, refineries, power plants and chemical plants.

 

This Vermiculite Coated Ceramic Fiber Fabric has a very high vermiculite content (10 to 12%).

Allows for contacting molten metal slag

An alternative to asbestos based textiles

Provides low thermal conductivity and good dielectric strength and features excellent corrosion resistance

Used at 2300°F / 1260°C continuously, molts above 3000°F / 1650°C

Ceramic Fiber Tape

Ceramic Fiber Tape is manufactured from high performance ceramic fiber yarns reinforced with either a wire or glass filament. These are produced on traditional textile machinery by carding high purity 1260 grade ceramic fibers with a percentage of cellulose fiber to assist in the processing. The yarns are then spun and combined with the relevant reinforcing media to improve the tensile strength at extended temperatures.

 

Indian Ceramic Webbing tape are woven in netted form made from Ceramic Yarn. Ceramic fiber insulation tapes are available in a variety of thickness from 2 - 6mm. The standard width of the Cloth is 25mm to 100mm. 

 

Ceramic Fiber Tape is used for insulating covers or shields, cable or pipe wrapping, expansion joints, high temperature seals or gaskets. Ceramic Fiber Tape finds application in the following sectors:

 

Welding

Foundry works

Aluminum and steel mills

Boiler insulation and seal

Exhaust systems

Shipyards

Refineries

Power plants

Chemical plants

 

Major usage:

 

Fire Protection, Pipe Hanger Insulation, Insulation of Industrial Chimney, Radiant Heat Shields, Filtration Media, Electrical Insulation, Expansion Joint, Gaskets and Wrapping Material, Laminates, Gaskets and Seals, Boiler Tadpole Gaskets, Welding and Stress Relieving Curtains, Lacing Tape, Cable Insulation and Protection against High Temperature.

BSTFLEX Basalt Fiber Tape

Basalt Fiber Tape is made from basalt fiber ,Basalt fiber has properties of anti-aging, high-temperature resistant, acid and alkali-resistant, strong binding force to concrete and resin, flame retardant and good insulation, low moisture absorption, can replace carbon fiber and aramid fiber in some aspects.

 

 

Specification:

Thickness: 1.5mm up to 6mm

Width: 10mm up to 200mm

Weaving structure: plain for thickness 1.5mm up to 5mm, twill for thickness 1.5mm up to 6mm

Roll length: MAX 50m

 

Application:

provide protection of industrial wires, cables, hoses, tube and pipe and also provide thermal insulation and personnel protection. Also used as a gasket or seal.

BSTFLEX High Temperature Woven Silica Tape

This High Temperature Woven Silica Tape is made by silica fiber, contain more than 96% SiO2.

 

High Temperature Woven Silica Tape retain strength and flexibility in insulation applications at 1800° (982°C.) When spiral wrapped over pipes, hoses or cables, they offer protection against molten metal or extreme radiant heat. It is completely fireproof and with it's high silica (SiO2) content (96% minimum) it protects against contamination in high temperature environments. Silica tapes are available with pressure sensitive adhesive to facilitate wrapping installations. Upon exposure to the service temperatures that justify the selection of silica materials, the organic adhesive decomposes.

 

High Temperature Woven Silica Tape Applications

Insulation Wrap for Pipes, Hoses and Electrical Cables

Isolated High Temperature Welding Protection

Thermal and/or Welding Blanket Fabrication for Cut Edge Protection to Eliminate Fraying

 

Extensively used in the following Industries:

Power Generation

Shipbuilding

Construction

Welding

Metal Processing

High Temperature Woven Silica Tape Sizes

Width (mm)	Thickness (mm)	Part #
25	1.5	SFT-25W-15M
50	1.5	SFT-50W-15M
75	1.5	SFT-75W-15M
100	1.5	SFT-100W-15M

Customs width and thickness is available.

BSTFLEX Heat Treated Fiberglass Woven Tape

Heat Treated Fiberglass Woven Tape Description:

It is fabricated from high quality texturized C glass or E glass fiber yarns with heat treated that will not burn and will withstand continuous exposure to temperatures of 1022F/550C.

It resists most acids and alkalis and is unaffected by most bleaches and solvents.

It is an excellent substitute for asbestos tape.

Heat Treated Fiberglass Woven Tape with copper wire, nickel wire or stainless wire are also available.

 

Heat Treated Fiberglass Woven Tape Applications:

All types of thermal insulation and heat protection provide of industrial wires, cables, hoses, tube and pipe and also provide thermal insulation and personnel protection.

Used as a gasket or seal.

 

Thickness:           1.0 mm up to 6.0 mm

Width:                  10mm up to 200mm

MAX length         100 m/roll

 

We also make below treatments for some special applications:

Aluminum foil faced on one side

Vermiculite coated

Heat treated(caramelized)   

Graphite coated 

Silicone coated  

Backed with self-adhesive tape

Heat Treated Fiberglass Woven Tape Sizes

Part #	Thickness (mm)
FGT-HT-10M	1.0
FGT-HT-15M	1.5
FGT-HT-20M	2.0
FGT-HT-30M	3.0
FGT-HT-40M	4.0
FGT-HT-50M	5.0

BSTFLEX Vermiculite Coated Fiberglass Tape

Vermiculite Coated Fiberglass Tape will withstand temperatures of 1500°F / 815°C continuous exposure. The base High Temperature fiberglass tape is fabricated from high quality type E fiberglass that will not burn.

 

Vermiculite Coated Fiberglass Tape applications for this product include thermal insulation and/or protection of wires, cables, hoses, pipe and tube, as well as affording energy savings and personnel protection.

 

Vermiculite Coated Fiberglass Tape compared to uncoated fiberglass, vermiculite coated fiberglass provides increased resistance to high temperature, flame, and abrasion. In addition, the vermiculite film helps to seal against gases and liquids. This tape is completely non-flammable.

 

Vermiculite Coated Fiberglass Tape applications

Oven door seals

Electrical insulation

Hose protection

Cable protection

Pipe wrap

High temperature gasketing

Vermiculite Coated Fiberglass Tape Size

Width	Part NO.
1"	145111-X-Y
2"	145112-X-Y
3"	145113-X-Y
4"	145114-X-Y
6"	145115-X-Y
8"	145116-X-Y

For the “-X” value above in the part number, “-1” for 1 mm thick, “-1.5” for 1.5 mm.

For the “-Y” value above in the part number, “-nature” for nature colored, “-black” for black colored.